The Exceptionals Get In Touch
OpenWall
Homeowner guide · Ontario

Removed a Load-Bearing Wall Without a Permit? What to Do Now

Updated September 2026 · Written by H. Malekghasemi, P.Eng.

If you (or a previous owner) already took out a load-bearing wall without a permit, the good news is: it's usually fixable. The bad news is: leaving it alone tends to get more expensive and more stressful the longer it waits — especially if you're planning to sell. Here's what the retroactive process generally looks like in Ontario.

Why this comes up

What retroactive compliance usually involves

  1. An engineer assesses the existing beam and supports — checking size, species/grade if wood, bearing at each end, and what it's currently carrying.
  2. A sealed as-built drawing is prepared, either confirming the existing structure is adequate, or specifying what needs to be added or corrected (for example, an extra post, blocking, or a larger beam).
  3. An application is made to the municipality for the permit, along with the engineer's drawing — some municipalities have a specific after-the-fact or retroactive permit process, often with an additional fee.
  4. Any corrective work identified is completed and inspected, if the original beam turns out to be undersized.
  5. The permit is closed once the municipality is satisfied, giving you a clean record for future reference or resale.
Don't wait for a sale to deal with it. Fixing this on your own timeline, with your own choice of contractor if corrective work is needed, is far less stressful than doing it under pressure during a real estate deal with a closing date looming.

Will I need to open the wall back up?

Not necessarily. If the beam is visible — for example, exposed in an unfinished basement ceiling — an engineer can often assess it without any demolition. If it's fully enclosed in finished drywall or a ceiling, some limited opening (sometimes just a small inspection hole) may be needed to confirm what's actually there before it can be signed off.

Does this affect selling my home?

It can. An opened-up wall is usually obvious to a home inspector, and real estate lawyers increasingly check permit history as a matter of course. Unresolved permits on structural work can lead to price renegotiation, deal delays, or in some cases a buyer walking away entirely. Resolving it ahead of listing removes that risk from the negotiation.

The upside: in most cases, the existing beam turns out to be reasonably close to what's required, and the fix is a straightforward sign-off rather than a major rebuild. You won't know which situation you're in until it's actually assessed.

Get your existing wall assessed and sealed

Send us photos and details of the existing beam, and we'll let you know what's needed for a sealed, permit-ready drawing — flat fee, no obligation to proceed.

Get started →

This article is general information for homeowners in Ontario and isn't a substitute for a site-specific structural review. Retroactive permit processes vary by municipality — confirm the exact requirements with your local building department.